Club squash players need uniforms that survive fast footwork, tight courts and back-to-back matches without bagging out or fading by round three. Custom squash uniforms from FE Custom give Australian clubs a way to kit out a full squad in matching colours without settling for whatever a generic supplier has in stock for 2026.
- A lightweight v-neck jersey beats a raglan soccer cut for squash movement - buy the Harbour Men's V-Neck Jersey for training and match day.
- Sublimation printing holds team colour better than screen print after repeated washing - check the printing comparison before you order.
- Custom polo shirts work for warm-up and club social wear but are not a match-day squash uniform - consider, don't rely on them alone.
- Heavy cotton raglan jerseys trap heat on an indoor court - skip them for squash even if the price looks good.
- Minimum order size matters more for squash squads than for football teams because rosters run smaller - confirm it before you commit.
Why this matters
Squash is played indoors, at close range, in short intense rallies - the uniform has to move with a player's shoulders and hips without pulling or overheating. A cotton-heavy jersey built for a football sideline behaves differently under those conditions than it does on a pitch. Club committees ordering custom squash uniforms in 2026 are usually working with 8 to 20 players, tighter budgets than football clubs, and a shorter runway before the season starts - all of which changes what "the right uniform" looks like.
Getting the fabric and cut wrong doesn't just look bad in photos. A jersey that clings with sweat or restricts a reach for a drop shot slows a player down mid-match, and that's the opposite of what a uniform should do.
Who this is for
This guide is for club committee members, team captains and social league organisers in Australia ordering matching squash tops for a squad, ladder team or club night - not solo players buying a single racquet shirt off the rack. If you're coordinating sizes for 12 players, chasing a printer who understands sublimation, and trying to keep the order under a set budget before the season starts, this is written for you.
What to look for in custom squash uniforms for club players
Fabric weight and breathability
Squash rallies run hot and short, so a heavier cotton-blend fabric that suits an AFL guernsey or rugby jersey will feel wrong within the first game. Look for a lighter jersey weight built for constant movement rather than contact sport durability - it's the difference between a top that dries between points and one that stays damp all match.
Fit through the shoulders and underarms
A squash swing needs a full overhead reach, so a raglan sleeve or a cut with extra room through the underarm matters more here than it does for a stationary sport like cricket. A jersey that's tight across the shoulder blades will bind on every backhand.
Print method: sublimation versus embroidery
Sublimated colour is dyed into the fabric fibres rather than sitting on top of them, which means it doesn't crack or peel the way a screen-printed panel can after a season of hand-washing and quick turnarounds between matches. The embroidery vs printing comparison breaks down when each method actually makes sense - for a full-colour squash top, sublimation almost always wins.
Colour contrast under indoor court lighting
Indoor squash courts run on artificial lighting that flattens some colour combinations - pale pastels and low-contrast trims can wash out on court video or referee sightlines. Bold, saturated team colours read better under fluorescent or LED court lighting than muted tones do.
Minimum order flexibility for small squads
A squash club roster of 10 to 14 players is a fraction of the size of a football or netball club order, so a supplier that forces football-sized minimums will either overcharge per unit or force you to order spares nobody needs. Confirm the order threshold before you lock in a design, not after.
Turnaround against your season start
Social squash seasons and club ladders often start with less lead time than school-term sports, so a design-to-delivery window that fits your actual season calendar for 2026 matters as much as the fabric itself.
ryze-products placeholder
Top picks for club squash squads
The Breathable Pick - Harbour Men's V-Neck Jersey. A v-neck cut avoids the collar rub that a polo puts on a player reaching overhead for a lob, and the rev-style build gives more room through the shoulder than a raglan soccer top. Check the Harbour V-Neck Jersey if your squad wants one top that works for both training and match night. Buy.
The Smart-Casual Pick - custom polo shirt. A polo reads better for club presentation nights and warm-up laps than a full jersey does, and it's an easy add-on order alongside match kit. It's not built for the same range of motion as a v-neck jersey, so treat it as a second layer, not the match-day uniform. Consider.
The Budget Training Tee - Custom Lifestyle T-Shirt. At A$32.95 for a front-only print or A$44.95 with a back print, this cotton tee is the cheapest way to get every player in matching colours for club training nights before committing to a full match uniform order. It won't move like a performance jersey mid-rally, so keep it off court night. Buy for training, skip for match day.
The Overbuilt Pick - heavy raglan soccer jersey. Built for outdoor contact sport, a heavier raglan soccer cut traps heat on an indoor court and doesn't need the durability squash actually demands. It looks sharp in a catalogue photo and feels wrong by the second rally. Skip.
What to avoid
- Loose, boxy football cuts. They look fine standing still and bind or flap during a lunge for a drop shot.
- Screen-printed panels on a full-colour design. Screen print sits on the fabric surface and cracks faster than sublimated colour under repeated hand-washing.
- Ordering to football-sized minimums. A squash squad of 10-14 players doesn't need the same order volume as a 22-player football list - check the threshold before you commit.
Quick verdict comparison
| Pick | Fabric feel | Fit for squash movement | Verdict |
|---|---|---|---|
| Harbour V-Neck Jersey | Light, rev-style | Full shoulder range | Buy |
| Custom polo shirt | Mid-weight cotton blend | Restricts overhead reach | Consider (off-court only) |
| Lifestyle T-Shirt | Cotton, A$32.95-A$44.95 | Fine for training, not match play | Buy for training |
| Heavy raglan soccer jersey | Contact-sport weight | Traps heat indoors | Skip |
Where fit and print actually come together
A squash uniform order for 2026 comes down to two decisions stacked on top of each other: pick a cut that survives the movement, then pick a print method that survives the wash cycle. Get the cut wrong and players complain by week three. Get the print wrong and the club logo is peeling by finals.
FAQ
What's the best fabric for custom squash uniforms in Australia?
A lightweight, breathable jersey fabric beats heavier cotton-blend cuts built for contact sports. Squash rallies are short and intense, so a top that dries fast between points matters more than durability against tackles.
Is sublimation printing better than embroidery for squash tops?
Sublimation is better for full-colour squash designs because the dye sits inside the fabric fibres rather than on top of them. Embroidery works well for a small club crest but doesn't suit an all-over colour pattern.
How much do custom squash uniforms cost per player in Australia?
Customisable tees from FE Custom start around A$32.95 for a front-only print and run to A$44.95 with a front and back design, with jerseys priced separately. Exact per-player cost depends on squad size and the design chosen.
Can a small squash club order fewer than 10 uniforms?
Minimum order thresholds vary by supplier, so confirm the number before finalising a design. Squash squads typically run smaller than football or netball rosters, which changes what a reasonable minimum looks like.
Should a squash uniform be a polo or a jersey?
A v-neck jersey suits match play because it gives full shoulder range for overhead shots, while a polo works better for warm-up and club social wear. Treat the polo as a second layer, not the primary match uniform.
How do I stop a printed squash jersey from cracking?
Choose sublimation printing over screen print for any full-colour design, since sublimated ink is dyed into the fabric rather than layered on top. Hand-washing in cold water also extends the print's life regardless of method.
What colours work best for squash uniforms under indoor lighting?
Bold, saturated colours read better under fluorescent or LED court lighting than pale or low-contrast combinations. Test your club colours against the court's actual lighting before finalising the design.
How far in advance should a club order custom squash uniforms for 2026?
Order lead time depends on squad size and design complexity, so confirm the supplier's turnaround against your actual season start date. Social squash seasons often start with shorter notice than school-term sports.
One last thing
Most squash clubs default to a polo because it's the safe, familiar choice - but a polo collar is exactly what catches and drags during an overhead reach, which is the single most common shot in the sport. The v-neck cut solves a problem most committees don't notice until a player complains about it mid-season.